INTERNATIONAL / NATIONAL CONFERENCE
S. Nallusamy, S. Sujatha and M. Rajaram Narayanan, (2021), "Design and Analysis of Epoxy Granite Reinforced with Steel Vertical Machine Center Spindle Housing”, 3rd International Conference on American Association for Advances in Functional Materials, at USA, August 18-20, 2021 - Accepted for Presentation
S. Nallusamy, M. Rajaram Narayanan, S. Sujatha and R. Suganthini Rekha, (2021), "Experimental Investigation of Mechanical Properties and Effect of Porosity on Epoxy Granite Composite”, 4th International Symposium on Advanced Material and Application, at Incheon, South Korea, February 05-07, 2021
Gautam Majumdar and S. Nallusamy, (2019), "ABC Analysis and Diminution of Inventory Level through Forecasting Technique in a Medium Scale Manufacturing Industry”, International Conference on Industrial Engineering and Operations Management, at Pilsen, Czech Republic, July 23-26, 2019
Rajat S. Sen, Gautam Majumdar and S. Nallusamy, (2019), "Enhancement of Overall Equipment Effectiveness through Implementation of Total Productive Maintenance”, International Conference on Industrial Engineering and Operations Management, at Pilsen, Czech Republic, July 23-26, 2019
M. Rajaram Narayanan, S. Nallusamy and M. Ragesh Sathiyan, (2018), "Design and Analysis of a Wind Turbine Blade with Dimples to Enhance the Efficiency through CFD with ANSYS R16.0”, International Conference on Advanced Materials and Engineering Materials, at Bangkok, May 17-18, 2018
S. Nallusamy, M. Rajaram Narayanan and R. Suganthini Rekha, (2018), "Design and Performance Analysis of Vehicle Tyre Pattern Material using Finite Element Analysis and ANSYS R16.2”, International Conference on Advanced Materials and Engineering Materials, at Bangkok, May 17-18, 2018
S. Nallusamy, M. Rajaram Narayanan and S. Saravanan, (2018), "Investigation on structural steel and silicon carbide aluminum metal matrix composite spur gears using PTC Creo and ANSYS 16.0”, International Conference on Materials Design and Applications, at Colombo, Sri Lanka during April 04-06, 2018.
M. Rajaram Narayanan and S. Nallusamy, (2018), "Analysis on vibration characteristics of wind turbine blade to improve the effectiveness through CFD developed by ANSYS”, International Conference on Materials Design and Applications, at Colombo, Sri Lanka during April 04-06, 2018.
S. Nallusamy, M. Sreedharan, S. Sudangan and S. Srinath, (2017), "An experimental analysis of pollution performances in an insulator material through artificial polluted conditions”, National Conference on Advanced Materials: Processing and Characterization, at National Institute of Technology, Trichy, February 27-28, 2017, pp.115-121, ISBN 978-93-86724-04-5
S. Nallusamy, R. Suganthini Rekha, A. Karthikeyan, (2016), "Investigation on Mechanical Properties of Coir Fiber Reinforced Polymer Resin Composites Saturated with Different Filling Agents”, International Conference on Advanced Material Technologies (ICAMT)-2016, Organized by Indo American Technical Campus, Visakhapatnam, Andhra Pradesh, India, 27th and 28th December 2016
A. Karthikeyan, S. Nallusamy, (2016), "Investigation on Mechanical Properties and Wear Behavior of Al-Si-SiC-Graphite Composite using SEM and EDAX”, International Conference on Advanced Material Technologies, Organized by Indo American Technical Campus, Visakhapatnam, Andhra Pradesh, India, 27th and 28th Dec. 2016
R. Suganthini Rekha, P. Periyasamy and S. Nallusamy, (2016), "Manufacturing enhancement through reduction of cycle time using different lean techniques”, International Conference on Advanced Material Technologies, Organized by Indo American Technical Campus, Visakhapatnam, Andhra Pradesh, India, 27th and 28th Dec. 2016
Suman Kumar Jha, S. Nallusamy, Ashwin Mathur, (2016), "Enhancement of heat rejection rate in heat sink using phase change materials”, International Conference on Researches in Science, Management and Engineering, Organized by International Organization of Scientific Research and Development, Coimbatore, Feb. 18 & 19, 2016.
K. Balakannan, S. Nallusamy, P.S. Chakraborty, (2014) "Effective trends of PDM involved in new product development”, International Conference on Advances in Design and Manufacturing at National Institute of Technology, Trichy, Dec 5-7, 2014, pp 191-195, ISBN 978-93-84743-12-3, Bonfring
N. Manikanda Prabu, S. Nallusamy and T. Senthil Kumar, (2014), "Effect of solvent ether on internal combustion engine with J20 optimum characterized Bio-Diesel”, International Mechanical Engineering Congress 2014 at National Institute of Technology, Trichy, June 13th-15th, 2014
S. Nallusamy, (2013), "Characteristic analysis of bio-fuel emissions (NOx) and reduction techniques” 3rd International Conference on Advances In Engineering And Technology at Dr MGR Educational And Research Institute University, Chennai, held on 5 @6th April. 2013, pp. 44- 50, ISBN: 978-81-9089080-6-5, Bonfring
S. Nallusamy, N. Manikanda Prabu, (2013), "An investigation on jatropha curcas bio-Diesel”, 2nd National Conference on Innovative Research on New Technologies at Jayalakshmi Institute of Technology, Dharmapuri held on March 22, 2013, pp. 76-81
S. Nallusamy, (2010), "Reliability of state transport undertaking Chennai”, International Conference on Advances in Industrial Engineering Applications in Anna University, Chennai, 6- 8, Jan 2010.
S. Nallusamy, (2008), "Fleet maintenance management in MTC, Chennai”, National Conference on Emerging Trends in Engineering and Technology at Rajarajeswari Engineering College, Chennai, 4th & 5th April, 2008.
S. Nallusamy, X. Charles, (2007), "Electromagnetic automobile engine system”, National Conference on Emerging Trends in Automobile Technology at Bhathidasan University, Coimbatore, 8th & 9th, February, 2007.
S. Nallusamy, Bijan Sarkar, Gautam Majumdar, (2007), "Reliability analysis of passenger transport vehicles in metropolitan transport corporation (MTC), Chennai”, 15th International Conference on New Horizons of Mechanical Engineering at Rajiv Gandhi Technological University, Bhopal, 18th to 20th, March 2007.
Ethiraj, N., Sivabalan, T., Meikeerthy, S., Kanthi Leela Venkata Ravi Kumar., Guvvala Chaithanya. and Guddeti Praveen Kumar Reddy. (2019), "Comparative Study on Conventional and Underwater Friction Stir Welding of Copper Plates", AIP Conference Proceedings, Vol. 2128, no. 1.
M.Chandran A. Lawrence William, A. Mohamed Azharudeen, R.Lingeshwaran,Design and Development of Industrial Robot, . National Conference TIME 2019
M.Chandran , Mrintujaykumar, khrawboklang, MdAkifAkhter,Mdasharafi, ,Firefighting Robot. National Conference TIME 2019
N.Ethiraj, T.Sivabalan , S.Meikeerthy, S.Ashik, S.JayaMahendran, K.Harish, Robotics Under Water. National Conference TIME 2019
M.Manikandan, N.Baskaran, S.Sakthivel, D.Kaushik, W.AndrewNallayan, N.Ethiraj, Investigation on EDM of Metal Matrix Composite. National Conference TIME 2019
H.Wesley, S.Chellvamurthy, R.Kamesh, N.Vignesh, J. Jayaseelan, Fabrication and Testing of Plant Fibre Hybrid Composite. National Conference TIME 2019
A.Saravanan, I.Prasannakumar, G.Shankar, S.Sarathkumar, Nandha Kumar, Nehal Ahmed, J.Jayaseelan, Manufacturingof Human Hair Hybrid Composite. National Conference TIME 2019
R.Ragavendran, S.Siva, K.Raghul, S.Murugan,K.R.Vijayakumar,Fabrication of Composite Material using Bamboo Fiber with Epoxy Resin. National Conference TIME 2019
A.Saravanan1, L.Prasannakumar1, G.Shankar1, S.Sarathkumar1, J.Jayaseelan, Manufacturing of Human Hair Hybrid Composite. National Conference TIME 2019
B,Ajay, M.Ajith , S.Bharath Kumar S.Gopalan, .K.Rajan,Performance and emission of diesel engine using Jatropha&Karanja oil and it's blends. National Conference TIME 2019
S.Abhilash, K.Baranikumar, P.Gopinath, P.Ommadhan, A.Manojbabu,Performance and Emission Test on a Four Stroke Single Cylinder Petrol Engine using Pine Oil Blends. National Conference TIME 2019
U.BhaveshChordia.,G.Surendra, T.Akilan, B.GokulChowdary, WilsonJohn, Experimental Analysis Thermal Energy Storage System using Phase Changing Material. National Conference TIME 2019
N.Boopathi, K.Kamesh, B.Devasurya, E.Jerishebin Experimental investigation of heat transfer characteristics in a circular tube fitted with triangular -cut twisted tape (TCTT) inserts. National Conference TIME 2019
K.EliyaSankar, P.DefrinAustin, B.HarishKumar, M.Gunasekaran, K.Rajan Performance and emission of diesel engine using diesel-plastic oil Blend. National Conference TIME 2019
S.Ganapathi, K.Balamanivasan, S.Balasubramaniyam, K.Bhavirajan Performance and Emission Test on Biodiesel using Safflower Oil in DI Diesel Engine. National Conference TIME 2019
K.Karthikeyan, S.Jegan, S.Jeeva, M.Karthick,Experimental Investigation on Four Stroke SingleCylinder, Petrol Engine with the help of Calcium Carbide (CaCo3) and Water. National Conference TIME 2019
k.lokesh, r.karthikeyan, r.manoranjan, m.wilsonjohn, performance analysis of latent heat thermal energy storage system using phase change material, National Conference TIME 2019
M.R.Akil, B.Jaganathan, .K.Mani,.R.Adithya Derrick, A.KandasamyPerfomance and Emission Charecteristics of CI Engine Using Biodiesel (Cotton Seed Oil). National Conference TIME 2019
Yogeshwar Kumar, TausifAlam, Sujan V Vargeese, K.M.Vyshnay, K.Rajan Performance and Emission Analysis of VCR Diesel Engine Using Fish oil Biodiesel. National Conference TIME 2019
R.Pradeepraj, K.Rajan, Performance and emissions Characteristics of diesel engine using biodiesel with hexanol fumigation. National Conference TIME 2019
SatishkumarSubendran, P. SantheepPandian,S. Sendilvelan , Performance, Combustion and Fatty acid analysis of a CRDI Engine with Pine oil, Lemon grass oil and Jamun Biodiesel blends. National Conference TIME 2019
DipenSarkar, Kumar Piyush Vijay, BhugeshPegu, JaydeepPal, J.Jayaseelan Design and Development of Stubble Harvester to avoid stubble burning in India. National Conference TIME 2019
S.Abhishek Raj, M.Arun Kumar ,B.Bharathmani M.Hitesh, Design and Fabrication of Plug in Charged Hybrid Vehicle. National Conference TIME 2019
M.KarunaRaju, K.Bharath Reddy, K.Naveen. J.Raviteja, M.Chandran, Design and Development of Quad copter. National Conference TIME 2019
K.Sreekanth, GauravMurali, R.Elangovan, C.Swajay Design and Development of Long Range High Endurance UAV using Laser Power Beaming. National Conference TIME 2019
Mamidi Thrinadh, S.Deepak, Manohar Kumar Singh, N.Ethiraj, T.Sivabalan, S.Meikeerthy,Underwater Friction Stir Welding of Brass and CopperUsingHCHCr Tool. National Conference TIME 2019
F K.Nefthalin, B.Kajakaran, K.VeeraRaghavan, Mohamed Rehan, D.A.Vinoth,.low Analysis of Heat Pipe with Radial Fin Using FEM. National Conference TIME 2019
Wilson John. M.R., Thrinadh Mamidi., Satishkumar Subendran. and Ganapathy Subramanian, L.R. (2018), "Experimental Investigation of Low-Temperature Latent Heat Thermal Energy Storage System using PCM and NEPCM", International conference on Advances in Mechanical Engineering, Vol. 402, no. 1, pp.1-17.
Ethiraj. N. and Suresh Kumar, D. (2018), "Experimental Investigation on AISI 304 Steel Sheets formed by Multi Stage Incremental Forming", International conference on Advances in Mechanical Engineering, Vol. 402, no. -, pp.1-7.
Kumar, A., Rajan, K., Naraynan, M.R. and Kumar, K.R.S. (2018), "Experimental Study of Diesel Engine using Cashew Nut Shell Oil (CNSO) with Varying Injection Pressures", AIP Conference Proceedings, Vol. 2039.
Chandran, M. (2018), "Experimental Study on Biodiesel (Karanja) in CI Engine", International Conference on Bioengineering on Health and Environment - 2018, Vol. 1, no. 1.
Sivakumar, K., Mohankumar, T. and Rajan, K. (2018), "Numerical Analysis of Heat Transfer Characteristics with Triangular Cut Twisted Tape Inserts", AIP Conference Proceedings, Vol. 2039.
Dhinesh Kumar R, Mukesh B Design and Analysis of an Aircraft Propeller.
Sri Harish ,Andrew Nallayan.W, Vijayakumar K R,.N Investigation on the Significant Factors Influencing Critical StrengthCharacteristics of Hybrid PMCLaminate.
K R, Thirumurugan ,Andrew Nallayan.W, Vijayakumar, Evaluation of the Interdependent Roles of Critical Parameters in Hybrid PMCLaminate against MechanicalProperties,
R. Navaneethakrishnan, A. Niresh Kumar A Review on PMC Airborne Radomes,
S. Inigo Denis, Ch. D. Joseph Ebenezer, K. Karthik Raja, S.Manoj, F. Fredrick Gnanaraj,Dr.J.Jayaseelan Mechanical Characteristics Study on Hybrid Hair Composite.
M. HariHaran, B. Harihara Sudan, V. Hari Krishnan, B. Manoj, F. Fredrick Gnanaraj, .J.Jayaseelan Mechanical Characteristics of Jute & Hair Epoxy Composite.
R. Ram Kumar and T. Santhosh Shivan Investigation of the Scope of Fillers in Polymer Matrix Composites.
ThotaGopi Krishna ,Pasam.Bhagyalakshmi, ThangellaRaviteja, , Thotteti Aditya Yadav, Yantrapragada Krishna Vamsi ,Combustion Performance and Emission Characteristics of a 4-Stroke Single Cylinder Diesel Engine Using Different Blends of Jamun Seed Oil and Diesel Fuel.
V.K.R.Samir1, Syed ayub, Surya Shobit, R. Surya Prakash Experimental Analysis On Increasing the Performance of Recycled Motorcycle,.
Aditya Dinesh, Martin Varghese , Kevin Ahas Sameul , Madhan Raj,Rajan.K ,Performance And Emission Characteristics Study Of Diesel Engine Using Annona Squamosa Methyl Ester With Different Compression Ratios.
Sujeetkumar,,Ashok Kumar, K Rajan, Shahidanwar, Shubhampandey, Sujitkumaryadav Performance and Combustion Characteristics of a Diesel Engine with Nickel-Chromium Coated Piston using Castor Oil-Diesel Blend .
Sauravkantibhattacharaya ,Ashok Kumar, K Rajan, Pyla Ajay, Rahul kumar, RiteshAnand, ,Effect of Bio Diesel Blends on Engine Performance and Exhaust Emission of a Diesel Engine Operating on Dee Jatropha Oil in Dual-Fuel Mode.
S.Sukesh Ram, R.Naveenbabu, K.Vivekkannan, K.Rajan ,Performance Improvement of Diesel Engine Using Waste Plastic Oil with BiodieselBlend with Oxygenated Additives(DEE).
Ashok Kumar, K Rajan, R.Vignesh, A.Dharnibabu, R.Bharathkumar, A. Jagadshwaran ,Effect of Bio Diesel Blends on Engine Performance and Exhaust Emission ofa Diesel Engine Fuelled by NeemOil.
Asutoshanand,Aftabalam,Gsrinivas,Asaikiran and K. Rajan ,Performance And Emission Characteristic Of Diesel Engine By Using CalophyllumInophyllum Biodiesel Using Variable Compression Ratio.
Ashok Kumar, Gautam Adhikari, HimanshuRanjan, AbdulRahim.A, KarthikeyanK,J ,Design and performance analysis of thermal energy conversion system by using solar collector.
Sri Harish.N,,S.SendilVelan, Syed Mohammed.S, KasiRajan.K, Thirumurugan.S ,An Experimental Investigation on theEffects of Ignition timing and Fuel Injection Timing in Hydrogen fuelled Spark IgnitionEngine,.
S.Venkatesh,,M.R.Wilson John, K.Yuvasri, L. R.Ganapathy Subramanian ,Experimental Analysis of Shell And Helical Coil Tube Heat Exchanger Using Paraffin Wax As Phase Change Material.
R.Ganapathy ,M.R.Wilson John, K.R.Sanjeeb Kumar,S.Prem Kumar, L. Subramanian ,Experimental Analysis Of Latent Heat Thermal Energy Storage System Using Nano-Enhanced Phase Change Material.
K.Prem Kumar,L. R.Ganapathy Subramanian M.R.Wilson John, ,Experimental investigation of charging and discharging process of latent heat thermal storage system using multiple phasechange Material.
K.Yokesh Kanna,T.Venkatesh, L. R.Ganapathy Subramanian, M.R.Wilson John, ,Experimental Study Of Latent Heat Thermal Energy Storage System Containing Phase Change Material.
M.venkatesan, Viby varghese, L. R.Ganapathy Subramanian M.R.Wilson John, ,Performance Analysis Of Double Pipe Heat Exchanger Using Phase Change Material.
Mohamed Farhan M R, Bernadette T, Ethiraj N ,Single Stage Single Point Incremental Forming on Stainless Steel AISI304 Sheet.
Saibal Chatttarjee,S.Mahesh,Naveen Dubey,Mritunjay, N.Ethiraj Study and Analysis ofElectric Discharge Machining of Aluminum Metal Matrixwith BoronCarbide.
U.Ajeethkumar, K.Damodaran, S. Manoj, N. Monish, V. Mohanavel ,Mechanical properties and microstructure of Friction Stir Welding in AA6082 and AA6061 Aluminum Alloys.
Arnab Ghosh, Contemporary Power Transmission System.
M.Bhuvanesh, B.Bharathi, S.Balaji, P.Aravind Kumar ,Nano-Fluids Based Solar Desalination using Flash Chamber.
Dimple Babu ,Experimental Study of Fretting Wear and its Influence under Varying Load and Amplitude.
Arun Govind, M. and Sendilvelan, S. (2016), "Energy Harvesting and Analysis of Waste Water Microbial Fuel Cell", International Conference on Engineering Innovations and Solutions, pp.26-34.
Kamaraj, N. and Manoj Babu, A. (2016), "Experimental Analysis of Vapour Compression Refrigeration System using the Refrigerant with Nano Particles", International Conference on Engineering Innovations and Solutions, pp.16-25.
Vishnoo Prathap, Sa.K. and Rajan, K. (2016), "Design and Analysis of Airborne Renewable Energy System", International Conference on Engineering Innovations and Solutions, pp.1-6.
Etraj, P. and Jayaprakash, J. (2016), "Prioritizations of GSCM Criteria by DEMATEL Method for Government Public Procurement in Indian perspective", Proceedings of the 10th International Conference on Intelligent Systems and Control, ISCO 2016.
Chandran, M. and Kandasamy, A. (2016), "FEM Analysis of Transmission Tower", International Conference on Science, Engineering and Technology, Vol. 1.
Nallusamy, S. (2015) ‘Reliablity Analysis of Passanger Transport Vehicles in Public in Public Sector Undertaking’, National Conference on Trends and Innovations in Mechanical Enginnering, TIME 2015 at Dr. MGR Educational and Research Institute.
Nallusamy, S. (2015) ‘A Review on Application of Thermal Engineering Storage System using Phase Change Materials’, International Conference on Advances In Materials, Manufacturing and Applications, at National Institute Of Technology, Trichy, pp. 9-14, ISBN. 978-93-84743-68-0.
Nallusamy, S. (2015) ‘A Review on Valuable Trends of Product Data Management (PDM) Occupied in New Product Development (NPD)’, International Conference on Applications and Design In Mechanical Engineering, at the School of Mechatronic Engineering, University Malaysia Peris, Malaysia.
Nallusamy, S. (2015) ‘Performance Analysis of Four Stroke Petrol Engine using Engine using Hydroxyl as an Additive Fuel’, International Conference on Science and Technology Engineering and Management, at Jeppiaar Engineering College, Chennai.
Nallusamy, S. (2015) ‘Investigation on Design Aspects of an Inspection Robot Fopr Concrete Structure’. International Conference on Advance in Production and Industrial Engineering, at National Institute of Technology, Trichy.
Nallusamy, S. (2015) ‘Study on Sustainable Development of Small Scale Industries through Green Lean Practices’, International Conference on Advance in Production and Industrial Engineering, at National Institute of Technology, pp. 515-519.
Nallusamy, S. (2015) ‘Analysis of Best Practice Supply Chain Management in Automobile Industries’, International Conference on Advance in Production and Industrial Engineering. At National Institute of Technology, Trichy, pp. 576-581.
Nallusamy, S. (2015) ‘Risk Minimization in Logistics Via Real - Time Vechile Routing System and Wireless Technologies’, International Conference on Advance in Production and Industrial Engineering. At National Institute of Technology, Trichy, pp. 600-605.
Rajan, K. and Ashok Kumar. (2015) ‘Performance and Emission Characteristics of a Direct Injection Diesel Engine Fuelled with Cashew Nut Shell Oil (CNSO) - Diesel Dlends with Diethyl Ether as Additive’. International Conference on Suitable Energy Resources, Material and Technologies (ISERMAT) held at SSN College of Engineering.
Rajan, K. and Pasam. Bhagylakshmi. (2015) ‘Preparation and Characterization in Thermal Engineering Storage Application’, International Conference on Suitable Energy Resources, Material and Technologies (ISERMAT-2015), held at SSN College of Engineering.
Rajan, K. and Suneetha Racharla. (2015) ‘A Fuzzy Logic Controlled Single Axis Solar Tracking System’, International Conference on Suitable Energy Resources, Material and Technologies (ISERMAT-2015), held at SSN College of Engineering.
Chandran, M. and Lokesh, S.S. (2015) ‘Design, Analysis, Fabrication and Testing the Mechanical Properties of Piston using Aluminium Metal Matrix Composites’, National Conference on Trends and Innovations in Mechanical Engineering, (TIME 2015). Dr.M.G.R.Educational and Research Institute University.
Ravichandra Ganesh, P. (2015) ‘Experimental Investigation on Performance and Emission Characteristics of Di Diesel Engine using Diesel - Ethanol Blends Aqueous Cerium Oxide Nano Fluid as Additive’, International Conference on Sustainable Energy Resources, Materials and Technologies, (ISERMAT-2015), held at SSN College of Engineering.
Sangeetha Krishnamurthy., Rajan, K., Senthil Kumar, K.R. and Prabhahar, M. (2015), ‘Experimental Evaluation of Compression Ignition Engine Fueled with Cashew Nut Shell Liquid Diesel Blend with the Effect of Various Injection, Pressures’, International Conference on Sustainable Energy Resources, Materials and Technologies, (ISERMAT-2015), held at SSN College of Engineering.
Mohanavel, V., Rajan, K. and Senthil Kumar, K.R. (2015) ‘Study on Mechanical Properties of AA6351 - TiB2 in Situ Composites’,International Conference on Sustainable Energy Resources, Materials and Technologies, (ISERMAT-2015) held at SSN College of Engineering.
Parimala, R. and Jabaraj, D.B. (2015) ‘Processing and Performance of TiO2 Braided Biaxial Carbon Fiber Composites’, International Conference Innovative Trends in Mechanical Engineering and Civil Engineering, PET Enginnering College, Vallioor.
Pasam. Bhagyalakshmi. and Rajan, K. (2015) ‘Experimental Study on Phase Change Material in Low Thermal Application’, National Conference on TIME 2015, Dr.M.G.R.Educational and Research Institute University.
Pasam. Bhagyalakshmi. and Paranthaman, S. (2015) ‘Comparison of Energy Consumption between Existing VCRS and Proposed VARS using Extraction Steam in a 210 MW Coal Fired Thermal Power Station’, National Conference on TIME 2015, Dr.M.G.R.Educational and Research Institute University.
Srinivasan, V. and Sridharan, N. (2015) ‘Study and Analysis of Micro Hardness of the Cladded Readngeometry during Pulse MIG Welding’. International Conference on Contemporary Engineering and Technology.
Radha, A. and Vijayakumar, K.R. (2015) ‘An Investigation of Mechanical Properties of Aluminum6061 Reinforced with Silicon Carbide’, International Conference on Sustainable Energy Resources, Materials and Technologies, (ISERMAT-2015) held at SSN College of Engineering.
Radha, A. and Vijayakumar, K.R. (2015) ‘An Investigation of Mechanical Properties of Aluminum6063 Reinforced with Silicon Carbide and Graphene Nanoparticles’, International Conference Innovative Trends in Mechanical Engineering and Civil Engineering, PET Enginnering College, Vallioor.
Suman Kumar Jha., Nallusamy, S., Ethiraj, N. and Manikanda Prabu, N. (2015) ‘A Review on Application of Thermal Energy Storage System Using Phase Change Materials’. International Conference on Advances in Materials, Manufacturing and Applications(AMMA 2015), pp. 9-14, Organized by National Institute of Technology, Trichy, India.
Jayaprakesh, J. (2015) ‘Oppurtunities and Challenges to Integrate Supply Chain for Public Procuvement in India Perspective an Empirical Study’, International Conference on Contemporary Engineering and Technology.
Jayaprakesh, J. (2015) ‘Analytical Hierichy Process to Select Environmentally Conscious Supplies for Sustensble Supply Chain Management. A Case Study in a Public Sector Transport Corporation’, International Conference on Mechanical & Manufacturing Engineering (ICMME-2015).
Jayaprakesh, J. (2015) ‘Multi AGENT Based Disassembly Sequencing and Planning for Economical Production’, International Conference on Mechanical & Manufacturing Engineering (ICMME-2015).
Jayaprakesh, J. (2015) ‘GEN-PRODIS Approach for Determing Total Cost for Disausly Sequencing Production’, International Conference on Mechanical & Manufacturing Engineering (ICMME-2015).
Jayaprakesh, J. (2015) ‘Appication of Lean Six Sigma Tools for Reducing of Defects in Pump Manufacturing’, International Conference on Mechanical & Manufacturing Engineering (ICMME-2015).
Vijayaraghunathan, V. and Wilfred Rajkumar, S.A. (2015) ‘CFD Analysis of Air Flow Optimisation of Louvre’, National conference on Emerging Research and Advances in Mechanical sciences.
Nallusamy, S. and Charles, X. (2014) ‘Characteristic Studies of Nano Fluids in Heat Transfer’, Internation conference on advances in design & manufacturing, Bontriny, pp. 183-190.
Nallusamy, S. and Charles, X. (2014) ‘Characteristic Studies of Nano Fluids in Heat Transfer’, Internation Conference on Advances in Design & Manufacturing, Bontriny. pp: 191-195.
Rajan, K. & Saravanakumar, P. (2013) Waste heat recovery of Exhaust Gas from Petrol Engines, International Conferences on Advances in Mechanical and Energy Engineering
Rajan, K & Pradeepraj, R. (2013) Performance emission and Combustion Characteristics of Jatropha Biodiesel- Diesel – Di ethyl ether (DEE) blends in a Diesel Engine, International Conferences on Advances in Mechanical and Energy engineering (ICAMEE2013)
Ashok Kumar, Rajan, K. & Rajaram Narayanan, N. (2013) The effect of injection pressure on the performance and emission of a diesel engine using Cashew nut shell liquid (CSNL) diesel blend, International Conferences on Advances in Mechanical and Energy Engineering
Karthick, M.& Rajan, K. (2013) Experimental Investigation on combustion performance and emission characteristics of Biodiesel and N -Butanol Additive In A Direct Injection (DI) Diesel Engine, International Conferences on Advances in Mechanical and Energy Engineering
Maiyappan, K. & Rajaram Narayanan, M. & Rajan, K. (2013) A Review of Optimization Techniques for Effective Utilization Resource for Production Planning,International Conferences on Advances in Mechanical and Energy Engineering
Jayaprakash, J. & Etraj, P. (2013) Application of green supply chain management and its stratiges a literature Review from 2002 -2012, International Conferences on Advances in Mechanical and Energy engineering
Manoj Babu, A. & Chittaranjan Bhuyan (2013) Experimental study in compatibility of mineral oil with R134a using TiO2 nano particles in Refrigeration system,International Conferences on Advances in Mechanical and Energy Engineering
Manoj Babu, A. & Babu Thiruvarthi, (2013) Experimental investigation of CNT nano nanoparticles as a lubricating additives for vapor compression system,International Conferences on Advances in Mechanical and Energy engineering
Chandran, M. & Senthilkumar, P. (2013) Cryoprobe A tool for Cryonanosurgery & Cryonics in a cryogenicprobe, International Conference on, Advances, Manufacturing and Energy Engineering, pp.752-758
Chandran, M. & Senthil Kumar, P. (2013) Cryoprobe a tool for Cryonanosurgery & Cryonics, International Conferences on advances, Manufacturing and Energy Engineering.
Parimala, (2013) Braided Compositesproperties and applications – A Review in the International conference
Chandran, M. & Senthilkumar, P. (2013) Design & Analysis and Heat Transfer in a Cryogenicprobe, International Conference on, Design, Analysis, Manufacturing and Simulation
Somasundaram, G. Rajendra Boopathy, S. and Krishnamoorthy, A. (2013) Roundness error Prediction in Friction Drilling of Aluminum Silicon Carbide Metal matrix Composites using Adaptive Neuro Fuzzy Inference System - Second International Conference on Advances in Materials Processing and Characterization
Chandran,M. & Senthilkumar, P.(2013) Design of Cryo(nano) Probe & Thermal Application, National Conferences on Advances in Materials, Design & Manufacturing(AMDM), B.S.Abdur Rahman University, Chennai
Kumaran, R. Kanna & Miltan (2013) Analysis of Tourists visiting Madurai, National Conference on Contemporary trends in Tourism and Hospitality, WCC, Chennai
Chandran, & SenthilKumar, (2012) A Study of Cryogenic Green (environment/clean) Technology, National Conference on Trends in Renewable Energy, Sources, Applications & Technologies
Chandran, M. (2012) A pilot study of cryo bio remediation in the National Conference on marine environmental challenges and coastal zone management strategy (MARINA 2012) on 13-14 Feb 2012 Bharathidasan University Tamil Nadu, India, pp.19
Chandran & Senthilkumar (2012) A study of environment (remediation) cryogenic process and coring technology a national level seminar on Application of conventional & Renewable Energy Sources
Chandran & Senthilkumar (2012) Nanoparticles and its application in cryosurgery national nanotechnology meet on energy and environment
Ganesan, M. (2012) Reduction of cold Start emission using Telescopic catalytic convertor in a Multi Cylinder Petrol Engine, Indian technology Congress 2012
Rajan, K. & Senthil Kumar, KR. (2012) Performance And Combustion Characteristics of a Copper Coated Internal Jet Piston Diesel Engine Fuelled With Bio-Diesel, International Conference on Mechanical, Production and Building sciences
Chandran, M. & Senthilkumar, P. (2012) Heat Transfer in cryo nano surgery VIT University, India 2nd International Conference on advances in Mechanical, Manufacturing and Building Sciences
Chandran, M. & P. Senthilkumar, (2012) Heat Transfer in Cryo Nano Surgery VIT University, India 2nd International Conference on Recent Trends in advanced materials
Chandran, M. & P. Senthilkumar, (2012) Cryonanosurgery for the Treatment of Cancer, 2nd International Conference on Nano Technology at the Bio-Medical Interface
Balasubramanian (2012) New Metaheuristics approach to minimize the makespan and tardiness in parallel flow machine shop scheduling, presented at the Int. Conference on Recent advances in Mechanical Engineering
Balasubramanian (2012) Reverse Engineering Methodology – A Review, presented at the Int. Conference on Recent advances in Mechanical Engineering
Balasubramanian (2012) Quality improvements in foundries using design of experiments, presented at the Int. Conference on Recent advances in Mechanical Engineering
Saravana Manikandan T M (2012) Intelligent Vision Inspection System for IC Engine Head: An ANN Approach, International Conference on Manufacturing Science and Engineering
Saravana Manikandan T M (2012) 2D Arbitrary Sized Bin Packing Optimization Using 2PDC Heuristic: A Adaptive Genetic Approach, International Conference on Challenges and Opportunities in Mechanical Engineering
Ganesan, M. (2011) Reduction of Cold Start Emission using Parallel Catalytic Convertor in a Multi Cylinder Spark Ignition Engine
Rajan, K. & Senthil Kumar, K.R. (2011) Combustion and emission Characteristics of A Thermal barrier coated Diesel Engine with Internal Jet Piston Using Biodiesel, International conference on Sustainable Energy and Intelligent System Conference
Ethiraj, N. Senthil Kumar, V.S. (2011) Microstructure Evaluation of Warm Deep Drawn Components of Stainless Steel AISI 304 2nd International conference on Mechanical and Manufacturing Engineering
Chandran, M. & P. Senthilkumar (2011) A Pilot study of Cryo Nano Surgery and Cryonics, International Conference on Nano Science, Engineering and Technology
Parimala, (2011) Prognostication of bearing failure in stress concentrated and 3D contact stress analysis composite laminatesposite in the International Conference
Chandran, M. & P. Senthilkumar (2011) A Pilot study of Cryo Nano Surgery and Cryonics, IEEE Explore
Balasubramanian (2011) Pareto Optimal to find sequences of jobs in parallel flow line set up with the objective of minimizing tardiness and earliness, Int. Conference on Recent advances in Mechanical Engineering
Kumaran (2011) Quality Management of Medical Tourism facilities and services in South India, Dr.MGR Educational and Research Institute, Chennai
Rajan, K. & Senthil Kumar, KR. (2010) Comparative Study on the Performance and Emission Characteristics of a Di Diesel Engine with Internal Jet Piston Using Vegetable Oil Methyl Esters, International Conference Emerging Trends in Energy and Environment
Balasubramanian (2010) New Heuristic Approach to Find Optimal / Near Optimal Sequences to Minimize Tardiness / Earliness of Jobs in Parallel Flow Line Set Up, International Conference on Industrial Engineering and Business Management
Kanagaraju, T. Rajendra Boopathy, S. and Somasundaram, G.(2010) Influence of Drilling parameters for Thrust force in Friction Drilling of Aluminum 6061-T6 Alloy, International Conference on Advances in Industrial Engineering Applications
Ganesan, M. & Sendilvelan, S. (2010) Reduction of cold start emission using catalytic convertors, National conference on Academic Research.
Rajan, K. & Senthil Kumar, KR. (2009) Experimental Investigation on the Performance and Emission Characteristics of a DI Diesel Engine using Internal Jet Piston with Biodiesel, National Conference on Low Carbon Technologies in Automobiles
Kumaran & Jayam (2009) Knowledge Management and Quality system
Balasubramanian (2009) Minimization of Makespan on Parallel Flow Line Scheduling, presented at the International Conference on Advanced Manufacturing and Automation
Kanagaraju, T. Rajendra Boopathy, S. and Somasundaram, G. (2009) Optimization of drilling parameters for thrust force and torque in Friction drilling of aluminum 6061-T6 alloy
Kumaran (2009) US Healthcare Crises and Opportunity for Medical Tourism in Asia, Dr.MGR Educational and Research Institute, Chennai
Saravana Manikandan, T.M. (2009) Heuristic Algorithm for 3D Single Container Loading Problem: A Genetic Approach, AICTE Sponsored National Conference on Optimization Techniques and Its Applications in Engineering (OPTAE 09), Rajalakshmi Engineering College, Chennai
Rajan, K. & Senthil Kumar, KR. (2009) Performance of Partially Stabilized Zirconia (PSZ) Coated Turbulence Induced Piston (Internal Jet) Diesel Engine with Jatropha methyl Ester, International conference on Mechanical and Building sciences in 3 rd Millennium 2009 (ICAMB-2009) on 14- 16 Dec 2009, VIT University, Vellore
Vijayakumar, KR. (2009) Design Fabrication and Analysis of Smart Materials, International Conference on Smart Materials, Thiyagaraja College of Engineering, Madurai, 2009
Vijaya Kumar, K.R. and Sundareswaran, V. (2009) Study on Piezo-Damping Cyanate Modified Epoxy Matrix Glass Fibre Composite with Lead Zirconate Titanate, International Conference on Latest Trends in Simulation Modelling and Analysis
Sendilvelan, S. (2009) Performance Achievement and Emission Control on DI Diesel Engine Fumigated with Methanol using Microprocessor Controlled Fumigator, Proceedings of the International Conference on Energy Engineering – ICCE, Pondicherry Engineering College, Puducherry, EEM227
Sendilvelan, S. (2009) Monitoring Silicon Content in the Crank Case Oil to Improve the Performance of Diesel Engines, Proceedings of the International Conference on Energy Engineering – ICCE- 2009, Pondicherry Engineering College, Puducherry. EEM 454, 2009
Sendilvelan, S. (2008) The Influence of Ethanol Blended Diesel Fuels on Emissions from a Diesel Engine’ Proceedings of the International Conference on Energy Sustainable Development, Dawood College of Engineering and Technology, Karachi Pakistan, ESD, 2008
Vijaya Kumar, K.R. and Sundareswaran, V (2008) Fabrication and analysis of smart composite plates, National Conference on Recent Advanced Trends in Mechanical, Automobile and Production Engineering
Ganesan, M. Praful Agarwal & Karandeep Singh (2008) Condition monitoring and fault diagnosis of I.C.Engines, National Conference on Recent Advanced Trends in Mechanical, Automobile and Production Engineering
